Sorry but this item is currently unavailable.
Please check back at a later stage.
Optimization for Cleanflight/Betaflight firmware - (flash as spracing target)
ARM Cortex-M4 core STM32F303CC with 32bit/72MHz/256K Flash/40K SRAM and hardware floating point unit
MPU6050 and BMP180 / BMP280 Sensors
Build-in 8MB flash for black box log recorder
On board OSD with absolutely original MAX7456EUI+ and standard FTDI debug port
Receiver connector with PPM/SBUS/SumD/DSM2/DSMX and RSSI input
Up to 3 serial ports and 8 PWM outputs
Multifunction connectors with SWD/UART2~3/Soft-serial/Buzzer/LED trip/Voltage detection
Multifunction OSD connectors with video_IN/ video_OUT/ICSP/debug port (UART1)
PDB connector with 5V input/Current and Voltage detection
Power input reverse polarity protection
Power input: 5.0~5.5V
Fixing hole spacing: 30mm
PPM/RSSI/SBUS/SumD Receiver Cable
Buzzer/LED strip/voltage detect cable
OSD debug port to FTDI adapter cable
· Optimization for BeeRotorF3 Flight Controller· Ferrite Beads and Capacity Filtering Circuit
· Dimension 35x35mm / Fixing hole spacing 30mm / Weight 5.5g
· 5.3V/3A and 12V/1.2A Step-Down Converter (If you use 12V out put, please confirm the battery input is 4S-6S)
· Input voltage and current sensors up to 28V/90A
· BeeRotorF3 Flight Controller connector with BEC/Current & Voltage detection
This product hasn't received any reviews yet. Be the first to review this product!